Indira Gandhi National Open University
Dated: , 2013

Sub : Re-Registration January, 2014 – B. Tech. in Mechanical Engineering – (BTME) (Computer Integrated Manufacturing) 2nd Year (ADCIM)

Dear Student,

You must be busy with your studies of Module - I of BTME (DCIM). Now it is the time for Re-Registration for Module - II of BTME (ADCIM). The course details for ADCIM Module - II are given in the table below:
Course Code Course Name Credits
BME-008 Machining Technology 4
BME-009 Computer Programming and Applications 4
BME-010 Tool Engineering and Management 4
BME-011 Computer Aided Process Planning 4
BME-012 Manufacturing System Integration and Control 4
BME-013 Production Management 4
BME-014 Metrology and Instrumentation 2
BMEL-003 Laboratory III 4
BMEL-004 Laboratory IV 2
Total 32

The course Re-Registration form is enclosed along with this letter. You are required to fill-in the same irrespective of whether you have appeared/not appeared in the Term-End Examination for the courses registered earlier for DCIM programme. For Re-Registration to Module - II of ADCIM, following actions are required at your end:
(1) Fill in the enclosed Re-Registration Form.

(2) Remit Registration Fee @ Rs.1400/- per credit for lab courses and @ Rs.400/- per credit for other courses. Thus, total fee to be paid by you is Rs.18800/-.

1. (3) The filled-in form along with the Demand Draft towards the Re-Registration Fee should be mailed to the address given below from 1st August 2013 to 30st September 2013 positively.
2. The last date for submitting the Re-Registration Form with a late fee as per schedule :
01.10.2013 to 31.10.2013 - Rs.200/-
01.11.2013 to 30.11.2013 - Rs.500/-
01.12.2013 to 20.12.2013 - Rs.1000/-

(5) The Re-Registration Forms received after the due date will be summarily rejected. The envelope containing the Course Re-Registration Form and Demand Draft should be superscribed with the words “RE-REGISTRATION FORM BTME Module-II –January, 2014” at the top left corner of the envelope.

With best wishes,
Encl: Re-Registration Form Yours sincerely,

Regional Director

IMPORTANT NOTES

1) Please write your Name, Programme Code and Enrolment Number on the back of the Bank Draft to ensure proper credit to your fee account.

2) Registration fee is to be paid by means of a Bank Draft obtained from any of the Scheduled Banks in the name of IGNOU and should be payable at the city where your Regional Centre is situated.

3) Change/Correction of Address : Students are directed to make use of proforma provided in the Programme Guide and send it to the Regional Director concerned who will forward the request after verifying the student's signatures to SRD, Maidan Garhi, New Delhi-110 068. Students are advised to make their own arrangements to collect the mail from the old address as it takes 4-6 weeks to effect the change.

4) Change of Programme Study Centre/Region : IGNOU takes special efforts to ensure adequate support services for students of Engineering & Technology programmes, therefore, once admitted and attached to a study centre, change is normally not allowed. However considering unforeseen reasons, the University may consider such requests on payment of charges as per University rules, provided the programme is also available at the proposed Study Centre. The request should be made to the Regional Centre from where the student is seeking transfer with copies to the New Regional Centre and to the Registrar (SRD), IGNOU, Maidan Garhi, New Delhi-110 068.

5) Non-receipt of Study Materials : In case of non-receipt of study material and current assignments please contact the concerned Regional Centre

6) Identity Cards are issued by the Regional Centre. In case of loss, the student may get duplicate identity card on payment of Rs.200/- by means of demand draft drawn in favour of IGNOU and payable at the place of your Regional Centre.

7) Change of Address is not permitted until the commencement of session.

8) For any other problem, please write to the Regional Director.

INDIRA GANDHI NATIONAL OPEN UNIVERSITY
RE-REGISTRATION FORM
BTME (2nd Year) (ADCIM) – January, 2014

Dear Sir,
I hereby submit my Re-Registration Form for BTME (Module-II) (ADCIM) along with a demand draft/challan form for the requisite amount towards the Registration Fee as per details given below:
1. Programme Code : 00000 2. Study Centre Code: 0000
3. Name of the Student :___________________________________________________________
4. Enrolment No. : 000000000
5. Details of Registration Fee

For Demand Draft:
Name of the Bank: ……………………………… Name of Branch: ………………………
Demand Draft No.: 000000 Dated: 00-00-0000
Amount: Rs.18,800/- (Rupees Eighteen Thousand & Eight Hundred only)
. For cash through bank challan:
Computerised No:
(Issued by bank) Date:

6. Details of the courses registered for :
Course Code Course Name Credits
BME-008 Machining Technology 4
BME-009 Computer Programming and Applications 4
BME-010 Tool Engineering and Management 4
BME-011 Computer Aided Process Planning 4
BME-012 Manufacturing System Integration and Control 4
BME-013 Production Management 4
BME-014 Metrology and Instrumentation 2
BMEL-003 Laboratory III 4
BMEL-004 Laboratory IV 2
Total 32

Thanking you, Yours faithfully,

Date : …………………..
(Signature of the Student)
Place :………………….. Address :_______________________
_______________________
_______________________
_______________________

PIN : 000000

Indira Gandhi National Open University

Dated: , 2013

Sub: Re-Registration January, 2014 – BTME (3rd Year) in Computer Integrated Manufacturing

Dear Student,

You must be busy with your studies of ADCIM. Now, it is the time for Re-Registration for 3rd Year of B.Tech. Mechanical Engineering. The course details are given in the table below:

Course Code Course Name Credits
BME 015 Engineering Mathematics-II 4
BME 016 Engineering Mechanics 2
BME 017 Strength of Materials 2
BME 018 Engineering Materials 2
BME 019 Engineering Thermodynamics 2
BME 020 Kinematics and Dynamics of Mechanisms 4
BME 021 Principles of Electrical and Electronics Sciences 2
BME-022 Soft Computing in Computer Integrated Manufacturing 4
BMEP 001 Project 12
Total 34
The Re-Registration form is enclosed along with this letter. You are required to fill-in the same irrespective of whether you have appeared/not appeared in the Term-End Examination for the courses registered earlier for ADCIM programme. For registration of module-III of BTME, following actions are required at your end:

(1) Fill in the enclosed Re-Registration Form.

(2) Remit Registration Fee @ Rs.1400/- per credit for lab courses and @ Rs.400/- per credit for other courses. Thus, total fee to be paid by you is Rs.13600/-.

(3) The filled-in form along with the Demand Draft towards the Re-Registration Fee should be mailed to the address given below from1st August 2013 to 30st September 2013
positively.
(4 ) The last date for submitting the Re-Registration Form with a late fee as per schedule :
01.10.2013 to 31.10.2013 - Rs.200/-
01.11.2013 to 30.11.2013 - Rs.500/-
01.12.2013 to 20.12.2013 - Rs.1000/-

(5) The Re-Registration Forms received after the due date will be summarily rejected. The envelope containing the Re-Registration Form and Demand Draft should be superscribed with the words “RE-REGISTRATION FORM BTME Module III – January, 2014” at the top left corner of the envelope.

With best wishes,
Yours sincerely,
Encl. : Re-Registration Form

Regional Director

IMPORTANT NOTES

1. Please write your Name, Programme Code and Enrolment Number on the back of the Bank Draft to ensure proper credit to your fee account.

2. Registration fee is to be paid by means of a Bank Draft obtained from any of the Scheduled Banks in the name of IGNOU and should be payable at the city where your Regional Centre is situated.

3. Change/Correction of Address : Students are directed to make use of proforma provided in the Programme Guide and send it to the Regional Director concerned who will forward the request after verifying the student's signatures to SRD, Maidan Garhi, New Delhi-110 068. Students are advised to make their own arrangements to collect the mail from the old address as it takes 4-6 weeks to effect the change.

4. Change of Programme Study Centre/Region: IGNOU takes special efforts to ensure adequate support services for students of Engineering & Technology programmes, therefore, once admitted and attached to a study centre, change is normally not allowed. However considering unforeseen reasons, the University may consider such requests on payment of charges as per University rules, provided the programme is also available at the proposed Study Centre. The request should be made to the Regional Centre from where the student is seeking transfer with copies to the New Regional Centre and to the Registrar (SRD), IGNOU, Maidan Garhi, New Delhi-110 068.

5. Non-receipt of Study Materials : In case of non-receipt of study material and current assignments please contact the concerned Regional Centre

6. Identity Cards are issued by the Regional Centre. In case of loss, the student may get duplicate identity card on payment of Rs.200/- by means of demand draft drawn in favour of IGNOU and payable at the place of your Regional Centre.

7. Change of Address is not permitted until the commencement of session.

8. For any other problem, please write to the Regional Director.

INDIRA GANDHI NATIONAL OPEN UNIVERSITY
RE-REGISTRATION FORM
BTME (CIM) – 3rd YEAR - January, 2014

Dear Sir,

I hereby submit my Re-Registration Form for B. Tech. in Mechanical Engineering (Computer Integrated Manufacturing) 3rd Year along with a demand draft/Challan Form for the requisite amount towards the Registration Fee as per details given below:

1. Programme Code : 00000 2. Study Centre Code : 0000
3. Name of the Student :___________________________________________________________
4. Enrolment No. : 000000000
5. Details of Registration Fee (For Demand Draft):
Name of the Bank: ……………………………… Name of Branch: ………………………
Demand Draft No.: 000000 Dated: 00-00-0000
Amount: Rs: 13,600/- ( Rupees Thirteen Thousand Six Hundred only)
For cash through bank challan:

Computerised No:
(Issued by bank) Date:
6. Details of the courses registered for:
Course Code Course Name Credits
BME 015 Engineering Mathematics-II 4
BME 016 Engineering Mechanics 2
BME 017 Strength of Materials 2
BME 018 Engineering Materials 2
BME 019 Engineering Thermodynamics 2
BME 020 Kinematics and Dynamics of Mechanisms 4
BME 021 Principles of Electrical and Electronics Sciences 2
BME-022 Soft Computing in Computer Integrated Manufacturing 4
BMEP 001 Project 12
Total 34

Thanking you, yours faithfully,

Date: ………………….. (Signature of the Student)
Place: ………………….. Address:_______________________
_______________________
_______________________
_______________________
PIN: 000000

Indira Gandhi National Open University

Dated: , 2013

Sub: Registration January, 2014 – 4th Year of B.Tech. (Mechanical Engineering) in Computer Integrated Manufacturing.

Dear Student,

You must be busy with your studies of BTME III rd Year. Now, it is the time for Re-Registration for 4th Year of B.Tech., Mechanical Engineering. The course details are given in the table below:

Course Code Course Name Credits
BME-023 Advanced Manufacturing Technology 4
BME-024 Mechanical Engineering Design 4
BME-025 Condition Monitoring and Maintenance Engineering 2
BME-027 Heat and Mass Transfer 4
BME-028 Fluid Mechanics 2
BME-029 Robotics 4
BME-030 Elective Subject (Safety Engineering) 4
BME-031 Energy Conversion 2
BME-035 Industrial Engineering and Operations Research 4
BMEL-005 Mechanical Engineering Lab Practices 4
Total 34

The course Re-Registration form is enclosed along with this letter. You are required to fill-in the same irrespective of whether you have appeared/not appeared in the Term-End Examination for the courses registered for earlier programme. For Re-Registration to BTME 4th year, following actions are required at your end:
(1) Fill in the enclosed Re-Registration Form.

(2) Remit Registration fee @ Rs.1400/- per credit for lab courses and @ Rs.400/- per credit for other courses. Thus, total fee to be paid by you is Rs.17600/-.

3. (3) The filled-in form along with the Demand Draft towards the Registration fee should be mailed to the address given below from 1st August 2013 to 30st September 2013 positively.
4. The last date for submitting the Re-Registration Form with a late fee as per schedule :
01.10.2013 to 31.10.2013 - Rs.200/-
01.11.2013 to 30.11.2013 - Rs.500/-
01.12.2013 to 20.12.2013 - Rs.1000/-

(5) The Registration Forms received after the due date will be summarily rejected. The envelope containing the Course Registration Form and Demand Draft should be superscribed with the words “RE-REGISTRATION FORM BTME Module - IV-January, 2014” at the top left corner of the envelope.
With best wishes,
Encl. : Re-Registration Form Yours sincerely,

Regional Director

IMPORTANT NOTES

1. Please write your Name, Programme Code and Enrolment Number on the back of the Bank Draft to ensure proper credit to your fee account.

2. Registration fee is to be paid by means of a Bank Draft obtained from any of the Scheduled Banks in the name of IGNOU and should be payable at the city where your Regional Centre is situated.

3. Change/Correction of Address: Students are directed to make use of proforma provided in the Programme Guide and send it to the Regional Director concerned who will forward the request after verifying the student's signatures to SRD, Maidan Garhi, New Delhi-110 068. Students are advised to make their own arrangements to collect the mail from the old address as it takes 4-6 weeks to effect the change.

4. Change of Programme Study Centre/Region: IGNOU takes special efforts to ensure adequate support services for students of Engineering & Technology programmes, therefore, once admitted and attached to a study centre, change is normally not allowed. However considering unforeseen reasons, the University may consider such requests on payment of charges as per University rules, provided the programme is also available at the proposed Study Centre. The request should be made to the Regional Centre from where the student is seeking transfer with copies to the New Regional Centre and to the Registrar (SRD), IGNOU, Maidan Garhi, New Delhi-110 068.

5. Non-receipt of Study Materials : In case of non-receipt of study material and current assignments please contact the concerned Regional Centre

6. Identity Cards are issued by the Regional Centre. In case of loss, the student may get duplicate identity card on payment of Rs.200/- by means of demand draft drawn in favour of IGNOU and payable at the place of your Regional Centre.

7. Change of Address is not permitted until the commencement of session.

8. For any other problem, please write to the Regional Director.

INDIRA GANDHI NATIONAL OPEN UNIVERSITY
RE-REGISTRATION FORM
BTME (CIM) 4th Year – January, 2014
Dear Sir,

I hereby submit my Re-Registration Form for B. Tech. in Mechanical Engineering (Computer Integrated Manufacturing ) 4th Year (Module-IV) along with a demand draft/challan form for the requisite amount towards the Registration Fee as per details given below:
1. Programme Code : 00000 2. Study Centre Code: 0000
3. Name of the Student :___________________________________________________________
4. Enrolment No. : 000000000
5. Details of Registration Fee:
For Demand Draft:
Name of the Bank: ……………………………… Name of Branch :………………………
Demand Draft No.: 000000 Dated: 00-00-0000
Amount: Rs: 17,600/- (Rupees Seventeen Thousand & Six Hundred only)
For cash through bank challan:
Computerised No:
(Issued by bank) Date:
6. Details of the courses registered for:
Course Code Course Name Credits
BME-023 Advanced Manufacturing Technology 4
BME-024 Mechanical Engineering Design 4
BME-025 Condition Monitoring and Maintenance Engineering 2
BME-027 Heat and Mass Transfer 4
BME-028 Fluid Mechanics 2
BME-029 Robotics 4
BME-030 Elective Subject (Safety Engineering) 4
BME-031 Energy Conversion 2
BME-035 Industrial Engineering and Operations Research 4
BMEL-005 Mechanical Engineering Lab Practices 4
Total 34
Thanking you, Yours faithfully,

Date : ………………….. (Signature of the Student)
Place :………………….. Address :_______________________
_______________________
_______________________
_______________________

PIN : 000000